Oki MC332dn Startup Manual page 106

Printing from a Computer
5
If setting the IP address manually, check
that [Manual] is selected, and press
If obtaining the IP address automatically, press
the to select [Auto], and press
step 10.
6
Enter the IP address using the ten-key
pad, and press
5
To move to the next box, press the
7
Enter the subnet mask using the ten-key
pad, and press
To move to the next box, press the
8
Enter the default gateway address using
the ten-key pad, and press
To move to the next box, press the
9
Enter the DNS server and WINS server if
needed.
If it is not necessary to connect the DNS server
or WINS server to the network, press
pop-up message showing setting completion is
displayed.
. Proceed to
OK
.
OK
.
.
OK
.
.
OK
.
until the
OK
10
When the setup menu screen is
. displayed, press
OK
setup.
11
For the confirmation message, check
that [Yes] is selected and press
◆ Print the Network Information to check that
the IP address and other network information
are properly set.
1
Press the <SETTING> key on the
operator panel.
2
Check that [Reports] is selected and
press .
OK
3
Press the
press .
OK
4
Press the
Information] and press
5
For the confirmation message, check
that [Yes] is selected and press
The Network Information is printed.
‰ Step 2 Installing a Printer Driver
Note
● To complete this procedure, you must be logged in as an
administrator.
1
Check that your machine and the
computer are turned on and connected,
and then insert the "Software DVD-ROM"
into the computer.
- 106 -
to complete the
to select [System] and
to select [Network
.
OK
.
OK
.
OK