Oki MC332dn Startup Manual page 62

Scanning to Shared Folder
3
Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4
4
Plug the other end of the Ethernet cable
into the hub.
5
Hold down the power switch for
approximately one second to turn on the
power.
„ Connecting using wireless LAN
(MC342dw, MC362w, MC562w, MC562dw,
ES5462dw MFP, MPS2731mc only)
Use the WPS (push button) function to set the
wireless LAN. For details on other methods
for setting the wireless LAN, refer to the
Configuration Guide.
1
Press the <SETTING> key on the operator
panel.
2
Press the
and then press the .
3
Log in by entering administrator password
of the device.
Use , , ,
press .
OK
Default administrator password is "aaaaaa".
The message below will be displayed for
about 5 seconds.
4
Check that [Automatic setup (WPS)]
is selected, and then press the .
5
Press the
then press
- 62 -
to select [Wireless Setting],
key to select letter and then
to select [WPS-PBC], and
.
OK