Oki MC332dn Startup Manual page 60

Scanning to E-mail
● Document Glass
Place a document face down and align its top
edge to the upper-left corner of the glass.
4
Close the document glass cover gently.
Note
● Do not apply an excessive load to the document
glass.
Memo
● The machine prioritizes the ADF when scanning
documents. Be sure not to place documents on the
ADF when you use the document glass.
Note
● If Carriage Error <02> is displayed, press Power
OFF/ON.
3
Check that [E-mail] is selected and then
press .
OK
4
Check that [Add Destination] is
selected and then press
5
Check that [To] is selected and then
press .
OK
6
Press the to select [Direct Input] and
then press
OK
.
OK
.
7
Enter a destination E-mail address up to
80 characters.
a
Press , ,
character you want, and then
press
OK
The selected character is entered in the text
field.
If you have entered an incorrect value, press
the <CLEAR> key and then enter the correct
value.
b
Repeat step
required are entered.
c
Press the
and press
8
If necessary, select [Cc] or [Bcc] and
repeat steps 6 and 7.
9
Press the
10
Press
M
ONO
Reference
● In addition to inputting the destination directly, you can
use the address book, group list, E-mail histories, LDAP
search, or One-Touch key pad to specify the destination.
For details, refer to the User's Guide > "Scanning" >
"Scan to E-mail".
● To load a landscape document, refer to the User's Guide >
"Operation" > "Loading document(s)".
- 60 -
, to select the
.
a
until all characters
and to select [Enter]
.
OK
to return to start screen.
or .
C
OLOR