Oki MC332dn Startup Manual page 40

Faxing
4
Check that [Add Destination] is
selected on the start screen and then
press .
OK
3
5
Press the to select [Direct Input] and
then press
OK
6
Enter a destination fax number up to
40 digits using the ten-key pad on the
operator panel.
Reference
● For dialing functions such as hyphen, prefix and
flash, refer to the User's Guide > "Faxing - MC342dn,
MC342dw, MC362dn, MC362w, MC562dn, MC562w,
MC562dw, ES5462 MFP, ES5462dw MFP and
MPS2731mc only" > "Sending a fax from the MFP" >
"Advanced operation".
7
Check that [Enter] is selected and then
press .
OK
.
8
Press
M
ONO
Note
● You cannot use the
● If the <STATUS> key is pressed and
twice, the information is displayed on the display
screen.
Memo
● When you want to cancel the operation during the
transmission, press the <STOP> key on the operator
panel.
Reference
● In addition to inputting the destination directly, you can
use the speed dial list, group list, transmission histories,
reception histories, or One-Touch key pad to specify the
destination. For details, refer to the User's Guide >
"Faxing - MC342dn, MC342dw, MC362dn, MC362w,
MC562dn, MC562w, MC562dw, ES5462 MFP, ES5462dw
MFP and MPS2731mc only" > "Managing the phone book".
● To load a landscape document, refer to the User's Guide >
"Operation" > "Loading document(s)".
● You can change the fax settings such as document size
and resolution as necessary. For details, refer to the
User's Guide > "Faxing - MC342dn, MC342dw, MC362dn,
MC362w, MC562dn, MC562w, MC562dw, ES5462 MFP,
ES5462dw MFP and MPS2731mc only" > "Sending a fax
from the MFP" > "Advanced operation".
● When you want to specify multiple destinations, refer
to the User's Guide > "Faxing - MC342dn, MC342dw,
MC362dn, MC362w, MC562dn, MC562w, MC562dw,
ES5462 MFP, ES5462dw MFP and MPS2731mc only" >
"Sending a fax from the MFP" > "Advanced operation".
- 40 -
to start transmission.
button.
C
OLOR
is pressed