Wall Mounted Type (Srk) - Mitsubishi Heavy Industries FDT Series Technical Manual

(7) Wall mounted type (SRK)

(a) Twin type
Item
Power source
Operation data
Nominal capacity
Power consumption
Running current
Power factor
Inrush current
Sound Pressure Level
Exterior dimensions
Height × Width × Depth
Exterior appearance
(Munsell color)
Net weight
Refrigerant equipment
Compressor type & Q'ty
Starting method
Refrigerant oil
Heat exchanger
Refrigerant control
Air handling equipment
Fan type & Q'ty
Motor <Starting method>
Air flow (Standard)
External static pressure
Outside air intake
Air filter, Q'ty
Shock & vibration absorber
Insulation (noise & heat)
Electric heater
Remote controller
Room temperature control
Safety equipment
Installation data
Refrigerant piping size
Connecting method
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant Quantity
Drain pump
Drain
Insulation for piping
IP code
Standard Accessories
Notes (1) The data are measured at the following conditions.
Item
Operation
Cooling
Heating
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.
(4) The operation data indicates when the air-conditioner is operated at 230V50Hz or 220V60Hz.
(5) Indoor unit specifications for one unit. Capacity and operation data is two indoor units are combined and run together.
(6) Branching pipe set "DIS-WA1" × 1 (option).
Model
Indoor unit SRK50ZJX-S1 (2 units)
Cooling
10.0 [ 4.0 (Min.)~11.2 (Max.)]
kW
kW
A 11.8 / 12.3
A
dB(A) Hi : 47 Me : 40 Lo : 27(C) / Hi : 48 Me : 40 Lo : 33(H)
mm
309 × 890 × 220
Fine snow
(8.0Y 9.3/0.1) near equivalent
kg
Louver fine & inner grooved tubing
Tangential fan × 1
W 27 < Direct line start >
CMM Hi : 13.5 Me : 11 Lo : 8(C) / Hi : 16.5 Me : 14.5 Lo : 10.5(H)
Pa
Not possible
Polypropylene net (washable) × 2
Polyurethane form
W
Thermostat by electronics
Internal thermostat for fan motor
Frost protection thermostat
Liquid line : I/U 6.35 (1/4")
mm
Gas line : I/U 12.7 (1/2")
Flare piping
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Hose Connectable with VP16
Mounting kit, Drain hose
Indoor air temperature Outdoor air temperature
DB WB
o o
27 C 19 C
o
20 C
: Pipe of O/U~Branch,
SRK100VNXPZJX
2.66
98
5 < Max.running current 24 >
15
—
—
—
—
0
—
—
RC-E5 (option) & SC-BIKN-E (Interface kit, option)
9.52 (3/8") × 0.8
12.7 (1/2") × 0.8
Max.100m
—
Necessary (both Liquid & Gas lines)
IPXO
DB WB
o o
35 C 24 C
o o
7 C 6 C
: Pipe of Branch~I/U
- 87 -
'12 • PAC-T-173
Adapted to RoHS directive
Outdoor unit FDC100VNX
220-240V~50Hz / 220V~60Hz
Heating
11.2 [ 4.0 (Min.)~12.5 (Max.)]
2.60
11.5 / 12.1
98
Cooling : 48 Heating : 50
1,300 × 970 × 370
Stucco White
(4.2Y7.5/1.1) near equivalent
105
RMT5134MDE2 × 1
Direct line start
0.9 M-MA68
M shape fin & inner grooved tubing
Electronic expansion valve
Propeller fan × 2
86 × 2 < Direct line start >
100
0
—
—
Rubber sleeve (for Compressor )
—
20 (Crank case heater)
—
Internal thermostat for fan motor
Abnormal discharge temperature protection.
9.52 (3/8") × 0.8 O/U 9.52 (3/8")
15.88 (5/8") × 1.0 O/U 15.88 (5/8")
Flare piping
See page 152
—
Holes size 20 × 3pcs
IP24
Edging
PCA001Z611
b