Mitsubishi Heavy Industries FDT Series Technical Manual page 509

Hyper inverter packaged air-conditioners fdt, fdf, fdtc, fden, srk, fdc, fdum series

Hide thumbs Also See for FDT Series:

Table of Contents

6. Put the heater underneath the heat

exchanger and align the end of heater

with the end plate of heat exchanger.

7. Fix the heater with brackets.

For model A, use 3 pcs of bracket A, 1pc of

bracket B and C. Fix bracket A and C with the

attached screw (OD4), and ﬁx bracket B with

the removed screw which is fastened at the

1) Put the end of heating part just after the bracket C

2) Fix the incoming and out going cable with one bracket A on the left of fan

bracket as ﬁgure shows.

1) Fix the heater so that the bracket

doesn't pinch the heater as ﬁgure

End of Heater

Detail view D

2) Place the heater so as to touch the

base completely.

End plate of Heat

For model B and C, ﬁx bracket A with the attached screw (OD5).

3) In bending position, twist the

heater to make it easier to bend,

and get back to be able to ﬁx it

with bracket.

'12 • PAC-T-173

This bracket is for

model B only

4) Be careful not to be injured by

aluminum ﬁn when ﬁxing the

heater with screw.

Show Quick Links

Table of Contents

Troubleshooting