Oki C9850 Maintenance Manual page 239

Display on Operating Panel
Staple Jam
Check Punch Chip Box
File Accessing
File System Operation failed
<nnn>
File System is Full
File System is Write Protected
Checking File System
Print File List
Install Finisher
Check Finisher
Staple Jam
Check Finisher
Paper Jam
Check Finisher
Paper Remain
Print Font
Press ONLINE Button for
Restoration
Black Toner Not Installed
Non Genuine Black Toner
Black Toner Empty
Black Toner Low
Black Toner Sensor Error
Black Image Drum Near Life
Black Image Drum Life
Condensing Error
Power Off/On
Power Off/On
nnn:Error
Program Update Mode
Program Data Received OK
43627911TH Rev. 3
Meaning
A staple is jammed in a stapler
unit of a inisher.
Either a punch dust box is full or
not installed.
The printer is in access to a ile of
an internal hard disk.
An error occurs while a printer is
in access to a ile of an internal
hard disk.
A space of a hard disk (option) or
lash memory runs out.
An invalid writing on a hard disk
(option) or a lash memory.
Checking a ile system is in
process.
Printing a ile list is in process.
A inisher is away from an
inverter. Connect a inisher into a
inverter.
A staple is jammed in a stapler
unit of a inisher. Remove it.
A paper jam occurs aroud a
inisher.
A sheet of paper remains aroud a
inisher.
Printing a font list is in process.
Press the ONLINE button for
recovery.
A black toner cartridge is
not installed in a printer or
an unrecognized black toner
cartridge is installed.
An unrecognized black toner
cartridge is installed.
A black toner runs out or a
genuine black toner cartridge is
not installed.
The printer runs out of a black
toner soon.
A censor error of the black toner
occurs.
A life of the image drum is about
to end.
It is time to change a black image
drum.
Condensation occurs in a printer.
Restart a printer.
Restart a printer due to an
occurance of an error.
The printer is in the program
update mode. (Printing is not
available).
A completion of program data
reception.
Oki Data CONFIDENTIAL
Measures
Remove a staple.
Either clear out a box or reinstall it.
Wait for a while.
Normal printing is available. Contact
with a customer center if an error still
remains.
Normal printing is available.
Normal printing is available.
Wait for a while.
Wait for a while.
Connect a inisher into a inverter.
Remove a jammed staple.
Keep a inisher away from a inverter and
remove the remaining papers.
Wait for a while.
Wait for a while.
Press the ONLINE button.
Install a genuine black toner cartridge.
Install a genuine black toner cartridge.
Install a new genuine black toner
cartridge.
Prepare a new black toner cartridge but
unnecessary to change.
Remove a black toner cartridge and re-
install it.
Prepare a new black image drum
cartridge but unnecessary to change.
Change to a new black image drum
cartridge.
Turn off the power and wait for a while.
Turn off the power again.
Turn off the power again.
–
Wait for a while.
239 /