(4) While lifting the Multipurpose Tray slightly with your right hand, push the lever inward with
your left hand and loosen it.
(5) Just as in (3) above, move the lever on the left of the Multipurpose Tray at the joint of the
tray and the printer into the position as shown below.
(6) While lifting the Multipurpose Tray slightly with your left hand, push the lever inward with
your right hand and loosen it.
(7) Move the loosened portions towards the printer. The cover will rise and the Feed Rollers
will be revealed.
(8) Put your inger into the hole under the rollers and open the cover in the arrow direction.
43627911TH Rev. 3
Lever
Lever
Lever
Oki Data CONFIDENTIAL
176 /