Oki C9850 Maintenance Manual page 150

• The following message appears when printing.
P=*** T=*** U=*** [###]
H=***%
P: Test Print Sheets (Unit: number of sheets)
U: Upper-side Heater temperature Measurement Value[Setting] (Unit: C)
L: Lower-Side Heater temperature Measurement Value[Setting] (Unit: C)
T: Environmental Temperature Measurement Value (Unit: %)
H: Environmental Humidity Measurement Value (Unit: %)
• Press [MENU+] key to switch the display.
KTR=*.**KV YTR=*.**KV
MTR=*.**KV CTR=*.**KV
YTR, MTR, CTR and KTR are image transfer voltage settings of each color. (Unit: KV)
• Press [MENU+] key to switch the display.
KR=*.**uA YR=*.**uA
MR=*.**uA CR=*.**uA
YR, MR, CR, and KR represent the electric current (uA) of the transfer roller for each
color, respectively.
• Press [MENU+] key to switch the display.
THICK= ***
REGIST=****
THICK: Detected medium thickness (µm)
TEMP: Fusing temperature (˚C)
REGIST: Constant speed of resist motor (hexadecimal)
EXIT: Constant speed of fuser motor (hexadecimal)
5. Accordingly repeat Steps 2 to 4.
6. Press the [BACK] key to end the test. (Returns to state 1)
43627911TH Rev. 3
L=***[###]
TEMP=***
EXIT=****
Oki Data CONFIDENTIAL
150 /