Oki C9850 Maintenance Manual page 151

5.1.2.6 Initialize NVM
This self-diagnosis is used to initialize the nonvolatile memory.
Continue to press the [MENU+] or [MENU-] keys until "NV-RAM INITIAL" appears
1.
at the top row of the display, and the system is in the self-diagnosis (Level 1) mode.
The [MENU+] key = Increment Test Item / the [MENU-] key = Decrement Test Item.
2. When the [ENTER] key is pressed, the Table No. to be initialized appears at the bot-
tom row of the display. There are 3 tables initialized. Press the [MENU+] and [MENU-]
keys until the applicable Table No. appears. The [MENU+] key = Increment Table No.
/ the [MENU-] key= Decrement Table No.
NV-RAM INITIAL
INITIAL 1
Note!
3. When the [ENTER] key is pressed, the "NV-RAM INITIAL" display blinks at the top
row of the display. Press it for 10 consecutive seconds to initialize all items indicated
in Table 5-3.
4. Press the [BACK] key to end the test. (Returns to state 1)
Item to Initialize
K-DRUM UNIT
Y-DRUM UNIT
M-DRUM UNIT
C-DRUM UNIT
FUSER UNIT
TR BELT UNIT
K-DISTNR
Y-DISTNR
M-DISTNR
C-DISTNR
DISTNR CNT
DISTNR BOX TNR CNT
43627911TH Rev. 3
Do not use INITIAL 2.
Table 5-3 NV-RAM Initial
Unit Initial Setting
IMAGES
IMAGES
IMAGES
IMAGES
PRINTS
IMAGES
-
-
-
-
-
-
Total number of revolutions since the ID unit for
0
each color has been installed.
0
0
0
Total number of revolutions since the fuser unit has
0
been installed.
Total number of revolutions since the belt unit has
0
been installed.
Quantity of each color of toner to be discarded
0
0
0
0
Quantity of toner discarded in toner disposal
0
Quantity of toner discarded in toner disposal or for
0 correction (e.g., color cast, color misregistration,
and density)
Oki Data CONFIDENTIAL
Detail
151 /