7311 Model D10 I/O Subsystem Removal And Replacement Procedures; Model D10 Fru Replacement Procedure List - IBM eserver pSeries 7311 D10 Service Manual

7311 Model D10 I/O Subsystem Removal and Replacement Procedures

The following procedures cover the removal and replacement of the 7311 Model D10
I/O Subsystem.
Note: Before performing any of the removal or replacement procedures in this chapter,

Model D10 FRU Replacement Procedure List

Field Replaceable Unit
(FRU)
Adapters
Bezel
Cover
Blower
I/O Backplane
Operating Position
Power Supplies
RIO Bus Adapter
Service Position
Starting the System
Static-Sensitive Devices
Stopping the System
Eserver pSeries 7311 Model D10 and Model D20 Service Guide
56
read the danger and caution notices on "Safety Considerations" on page 53.
FRU Procedure Name and Page Location
"D10 PCI Adapters" on page 61
"D10 Front Bezel" on page 58
"D10 Covers" on page 59
"D10 Fan" on page 120
"D10 I/O Backplane Assembly" on page 122
"D10 Operating Position" on page 57
"D10 Power Supply" on page 123
"D10 RIO Bus Adapter" on page 121
"D10 Service Position" on page 57
"Starting the System" on page 55
"Handling Static-Sensitive Devices" on page 54
"Stopping the System" on page 55