D10 I/O Subsystem Locations
This system uses physical location codes to provide mapping of the failing field
replaceable units. The location codes are produced by the processor subsystem's
firmware and AIX. For information about how to read a location code, see the service
guide for the processor subsystem to which your I/O subsystem is connected.
7311 Model D10 I/O Subsystem Front Locations
Eserver pSeries 7311 Model D10 and Model D20 Service Guide
10
1 Cooling fan
2 Power cord channel
2
1
3
4
3 Power Supply 2
U0. dd -V2
4 Power Supply 1
U0. dd -V1