Xerox Phaser 3635MFP Service Manual page 225

Machine Dimensions and Installation Space Requirements
Table 1 shows the dimension of the machine and the installation space required for safe oper-
ation.
NOTE: The dimensions shown in Table 1 allow for a 1 metre (39.4 inches) minimum safety
workspace around the machine. To acquire the minimum safety workspace it may be neces-
sary to move the machine within the area specified.
Figure 1 represents a plan view of a machine installation and is to be read in conjunction with
Table 1. The dimensions A and B outline a footprint of the machine within the boundary of safe
operation, dimensions C and D. The dimension E indicates the area required for airflow / work-
space at the rear of the machine.
Table 1 Working space requirements
Install width
Machine width Machine depth required
(A) (B) (C)
475mm 485mm 1485mm
(18.7inches) (19.1 inches) (58.4 inches)
NOTE: The machine depth dimension does not include the stand stabilizing feet.
Figure 1 Installation plan
Draft 4
Phaser 3635MFP
Install depth Install airflow/service
required workspace
(D) (E)
1485mm 178mm
(58.4 inches) (7 inches)
Front
6-21
General Procedures and Information
GP 13