Software Update Aka Firmware Update - Laspaziale S1 Dream Owner's Manual

7.28 Software Update aka Firmware Update

Earlier in this document you were shown how to determine your Firmware version number. To find
out if there is a newer version and download it, check here:
S1-Dream-p/s1-dream.htm
instruction manual. Not that the file needs to be unzipped and the S1D_xxxx.bin file placed on the
Dream's SD Card.
Even though this link is under the Plumbed version of the Dream and there
is also a link to the latest firmware update under the Tank model, the firmware for both
machines is identical. Both machines use the same controller board and the same firmware.
There is a jumper on the controller board so that the firmware knows which model it is
running on.
Dream GUI Addendum
S1 Dream Espresso Machine – GUI Addendum
You should download both the zipped firmware file and the installation
https://www.chriscoffee.com/La-Spaziale-
With the large Down Arrow icon displayed and the word
SW UPDATE showing at the top of the screen, press the
Menu button.
On an previously shown screen, the Dream referred to
Firmware version 1.19 and this Menu is called the
Software Update function. Even though there is a slight
difference in the definition of the two terms, LaSpaziale is
using them interchangeably.
Plug in the SD Card reader with the SD Card containing
the firmware update file inserted. Since files with an
extension of .bin are usually blocked from FTP
downloads or e-mail attachments, new firmware versions
are usually zipped. You will need to unzip the file and
use a PC connected card reader (this one can't be used)
so that you can unzip the .bin file and copy it to this SD
Card. When ready press the Menu/OK button.
Next the Dream display lists all .bin files it has found on
the card. Use the Up and Down arrows if you have
multiple .bin files in order to highlight the correct one,
then press the Menu button.
A progress bar is then displayed as the new file is copied
to the Dream's flash memory. It was not possible to
capture a screen shot of this bar since to process
happens so quickly.
When the new firmware is successfully loaded, this
screen us displayed.
Do NOT remove the SD Card or the SD Card Reader
until you see this screen.
There is NO actual reboot mechanism on the Dream.
Reboot = remove the AC plug from the wall, then
plug it back in!
Page 35