Write "Restore" Function (Machine Reads Data From Sd Card) - Laspaziale S1 Dream Owner's Manual

7.16 Write "Restore" Function
Dream GUI Addendum
S1 Dream Espresso Machine – GUI Addendum
(Machine Reads Data from SD Card)
With the large Write icon displayed and the word Write
showing at the top of the screen, press the Menu button.
With the SD card that came with your machine inserted into the
reader, plug the ribbon cable connector in to the port to the right of
the pressure gauge. Then press the Menu (OK) button to start the
restoration of your previously backed up machine settings.
There MUST be a properly formatted file called
DREAM_W.CSV on the SD Card for this feature to work. If you
just want to restore a previous backup you need to take your
Dream's SD card to a computer and rename or copy the
DREAM_R.CSV file to a file named DREAM_W.CSV.
The Backup (Read) operation from the previous section
backs up everything including the current time and date.
Unfortunately, this Restore (Write) operation also restores that
originally saved time and date. Therefore, after this operation
you will need to reset your machine's time and date
information.
This screen indicates that the DREAM_W.CSV file is
being read from the card and written to Dream memory.
When complete the screen displays Menu screen #2
indicating that the function completed successfully.
This error message can be caused by any of the following:

SD Card Read not attached

SD Card not inserted

DREAM_W.CSV file is not on the card

DREAM_W.CSV file is contains bad data
This message displays for a few seconds, then Menu screen #3
is redisplayed.
Page 27