Laspaziale S1 Dream Owner's Manual page 15

S1 Dream Espresso Machine – GUI Addendum
later turned back On.
If you are starting a new programming session Monday is where you
want to start. However, if you want to change a day other than
Monday, you can press the Up Arrow to scroll through the days of the
week. When you get to the desired day, press the Menu button to start
programming for that day. If you get to this screen inadvertently, keep
pressing the Up Arrow button. The option after Sunday is "Back".
Pressing the Menu button with Back selected takes you to the main
Menu screen #1
For this exercise we will press the Menu button with Monday selected.
You can set from 1-3 different ON/OFF times per day. Note the
st
encircled 1 above am, this indicates you are on the 1 time
setting screen for Monday. Using this screen is just like setting
the Time. Scroll to select the On Hour, press the Menu button
to move to the On minutes, scroll to select minutes, press the
Menu button to select Off Hour, scroll to select the desired
hour, press Menu again to select Off minutes, then press the
Menu button again. Then you are moved to the next screen.
This is the Monday ON/Off time #2 screen. The dashes indicate
nd
that the 2 ON/Off time for Monday is not currently in use. If
you want to leave it this way press only the Menu button 4x to
leave all values alone. Since you did not enter anything on this
screen you are not taken to the Monday #3 screen. However, if
rd
you did enter any times on this screen you are taken to the 3
screen which looks just like this one but a circled 3 above pm.
Note that if you do have times previously programmed for the
nd rd
2 (or 3 times for Monday or any other day) and you now
want to remove them, there is no direct way to select dashes
for these fields. What you do is set both the On and Off times
the same as the Off time on the previous screen (6:30pm in this
example). When you press Menu after entering the Off minutes,
the times are erased. If you then navigate back to this screen
you will see that it shows all dashes where times used to be,
Starting from Monday,after the last Menu button press, you are
presented with this screen. Pressing the Menu button with Copy
highlighted will copy all the Monday settings to the other six days of
the week. The only other option is to press the Down Arrow followed
by the Menu key and go into Tuesday programming mode. Tuesday as
well as any other days are programmed just the same as Monday, the
currently active day of the week shows in the top bar. If you don't
really want to change Tuesday, just press the Menu button until you
get to another screen similar to this that only displays " Wednesday"
with no Copy option. On that screen you can use the arrow keys to
skip Wednesday and select any other day of the week. The Monday to
Tuesday transition is the different one due to the Copy option that is
only available here. REMINDER: THE COPY OPTION IS ONLY
AVAILABLE ON THE MONDAY TO TUESDAY TRANSITION.
Dream GUI Addendum Page 14