Write; Led; Grinding; Egs - Laspaziale S1 Dream-T Owner's Manual

Hide thumbs Also See for S1 Dream-T:
Table of Contents

Advertisement

Features

Write

Feature not active at this time. In a future upgrade will allow the user to save user
profiles to the SD memory card to share settings with friends.

LED

The Barista LED lights can be turned on, off, or auto mode. In auto mode the LED‟s will
only light up when a shot is being drawn.

Grinding

This feature when enabled will give the user a notice while brewing if the grind is too
fine or coarse. This is helpful to help achieve better results. When enabled the user can set the
grinding for a tolerance of 5, 10, or 15 seconds. So if a shot button is programmed for 25
seconds and the grinding is set to 5 seconds then if the shot runs for less than 20 seconds a
message will appear on the display "Coarse Grind" Adjusting the grind finer will improve the
shots. If the shot runs for more than 30 seconds then the display will show the message "Too
Fine Grind" Adjusting the grind coarser will improve the shots.

EGS

When enabled the system will release a small amount of water from the grouphead after
20 minutes of inactivity. This is more for the European market where they keep ground coffee
in the portafilter and the EGS system will keep it from drying out. It can also be enabled to help
keep the shower screens clean after pulling a shot.

Auto Shutdown

When enabled the machine will automatically turn itself off after a pre-set
period of inactivity.

Group Clean

Allows the user to backflush the machine without being stored in the counter
menu. This is helpful if you are trying to keep track of how many shots are made on the
machine and do not want the backflushing to be counted as a shot.

Screensaver

The screensaver can be turned on or off. When turned on choose between The
Coliseum and the Statue Of Liberty screensavers.

Time Update

Choose to have daylight savings time activated.

Contrast

Change the contrast setting of the display.

Deact Pres Sens

Allows the user to deactivate the pressure sensor for the pump pressure
shown on the display. This is only for plumbed in models.

Password

Allows the user to create a password to block access to the main menu. The default
password is 1-2-3-4. To change a password select modify. After changing the password then it
must be activated in the password menu. If you forget the password then when prompted to
enter the password press and hold the
back to default and turned off.

SW Update

Allows the user to update the firmware in their machine. More information to
follow.
Owner's Manual
S1 Dream-T Espresso Machine
button for 5 seconds. The password will be changed
Page 10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents