Alarm History - Laspaziale S1 Dream Owner's Manual

7.14 Alarm History

Dream GUI Addendum
S1 Dream Espresso Machine – GUI Addendum
Use the up or down arrow buttons to select OFF or ON,
then press the Menu button to activate your choice. If
OFF is selected, the previous Menu screen #2 is
displayed. In this case you will received on Filter
replacement notification. If ON is selected you are taken
to the next Menu Option.
As with the Service option described previously, the
initial display shows the current gallons remaining based
on the last programmed count. The current filter count is
also available on the status screens shown in paragraph
6. You normally only enter this menu option when you
want to reset the value. If you don't want to reset the
current value, one option is to step away until the screen
times out and returns you to the Home screen. For the
other option see the last screen in this paragraph.
Use the Up and Down Arrow buttons to select the
desired number of gallons of water that you can run
through your filter. The press the Menu button to lock in
this value and return to Menu screen #2.
the Tank model only supports a small in-tank filter the
range for this setting is much smaller than on the
plumbed models.
Screen values for the Plumbed version are: 1250, 500,
250, 125, and BACK. If you press BACK no new value is
selected and the current value is not reset.
value and the selected value are the same the menu
does not show the BACK option. If, for example, you
reset the value to 125 Gal, exit the filter menu, then
come right back in, you will not see a BACK option since
the set value and the current value are still the same.
With the large Alarm icon displayed and the word
ALARMS showing at the top of the screen, press the
Menu button.
Note that since
If the current
Page 24