Toshiba e-STUDIO50F Operator's Manual page 36

Customizing Your Machine
Fax Parameter Table
No. Parameter
22 SUBSTITUTE RCV
23 RECORDING PAPER
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING PASSWORD
32 COPY REDUCTION
34 ENERGY SAVER
35 DAYLIGHT TIME
36 RING PATTERN
DETECT (DRD)
(See Note 2)
36
Setting
Number
1
*2
1
SIZE
*2
3
1
*2
70
----
100
1
*2
1
MODE
2
*3
1
*2
*1
2
Setting
Invalid Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
Valid
recording paper is jammed.
A4 Setting the recording paper size installed in your machine.
Letter
Legal
Fixed Selecting print reduction mode.
Fixed :Reduce received document according to setting of
Auto
Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print
----
reduction is selected on Fax Parameter No. 24.
100%
(----) Setting a 4-digit password for secured polling. (See page
68) Polling password can only be operated between e-
STUDIO50Fs.
Manual Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Auto
Manual : The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.
Off To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
Energy-
(1 to 120 minutes) for the machine to enter into the
Saver
selected mode.
Sleep
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off
Energy-Saver Mode : Saves energy by consuming less
Sleep Mode
Invalid Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
Valid
at 2:00 am on the first Sunday in April and fallback 1 hour
at 2:00 am on the last Sunday in October.
Invalid All ring patterns.
Valid Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the
type C described above.
Comments
: The unit will remain in standby
mode and consume more energy
than when in Energy-Saver or
Sleep modes.
power than when in standby mode
by turning off the fuser unit after the
specified time.
: This is the lowest power state that
the machine enters
specified time without
turning off.
after the
actually