Sending A Fax With Sub-Address - Toshiba e-STUDIO50F Operator's Manual

Plain paper facsimile
Hide thumbs Also See for e-STUDIO50F:
Table of Contents

Advertisement

Sending a Fax with Sub-Address

Use
to separate the Telephone number and the Sub-Address.
FLASH
If you want to send a document to a Confidential Box or a Bulletin Board Box using Sub-Address
Communications, set the box number of the remote party in the Sub-Address.
To send a document to a Bulletin Board box within a remote device, the setting of a password is required.
Refer to page 37.
1
Set document(s) face down.
2
Enter the telephone number, press
Sub-Address (up to 20 digits).
(Up to 36 digits including telephone number, pauses, spaces,
FLASH and Sub-Address)
Ex: Telephone number = 5551234, Sub-Address =2762
Enter as:
3
The document is stored into memory and your machine starts
to dial the number of the station and sends the document(s)
with Sub-Addressing information.
NOTE
1.
FLASH
in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-Addressing Transmission.
3. The Sub-Address is not transmitted during Manual Redial Mode.
FLASH
FLASH
5 5 5 1 2 3 4
separates the Sub-Address from the Telephone number and is indicated by an "s"
Sub-Addressing
DOCUMENT SET
5551234s2762❚
then enter the
2 7 6 2
* STORE *
05%
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents