Advanced Cd Playback - Sharp XL-HP700 Operation Manual

Advanced CD playback
XL-HP700
• Repeat play
All tracks on up to 3 discs, all tracks on the chosen disc or a pro-
grammed sequence can be continuously repeated.
17
,-,.
/,-
u·
I:J
/
To repeat all tracks on up to 3 discs:
Press the
~
/ c: button twice.
To repeat all tracks on the chosen disc:
1 Press one of the DISC SELECT CD -
@
(© 1
- © 3) buttons.
2 Press the
~
/ c: button .
To repeat desired tracks:
Perform steps 1 - 6 in the "Programmed play" section and then
press the
~
/ c: button twice.
To cancel repeat play: Press the
~
/
c:
button again.
"c:"
will go out.
• Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 3 discs:
1 Press the
~
/ c: button.
2 Press the RAN DOM button on the remote
control.
To random play all tracks on the chosen disc:
I:i~ "I~I
[I
e
1 Press one of the DISC SELECT CD _
@
(© 1
L..-------'~_--=-_=_
- © 3) buttons.
2 Press the RAN DOM button on the remote
control.
To cancel random play: Press the ~
/ c: button.
Notes:
• If you press the
~
button during random play, you can move to the track
selected next by the random operation. On the other hand, the
~
button
does not allow you to move to the previous track. The beginning of the
track being played will be located.
• In random play, the CD player will·select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the. (CD .) button.
Otherwise, the disc(s) will play continuously.
• The direct search buttons allow you to select up to number 9.
• When selecting number 10 or more, use the "+ 10" button.
B. For example, to choose 30
1 Press the
"+
10" button three times.
2 Press the "0" button.
Selected track number
Use the direct search buttons on
the remote control to select the de-
I:~/~,~
,-,
=, ,-,.,-,
'-I
sired track while playing the se-
~I'-'I'-I_----.;'-=-'.....;·'-=-'....;;;'-~I
lected disc.
A. For example, to choose 13
1 Press the "+ 10" button once.
2 Press the "3" button.
• Direct search of the track
By using the direct search buttons, the desired tracks on the current
disc can be played.
If the direct search buttons are pressed while the disc is stopped,
press the
~
/
c:
button to start the desired track on the current disc.
Notes:
• A track number higher than the number of tracks on the disc can-
not be selected.
• During random play, direct search is not possible.