Listening To The Radio - Sharp XL-HP700 Operation Manual

Listening to the radio
XL-HP700
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
FM stereo mode indicator
Notes:
• When radio interference occurs, auto scan tuning may stop
automatically at that point.
• Auto scan tuning will skip weak signal stations.
• To stop the auto tuning, press the TUNINGfTlME button
again.
3
Press the TUNINGITIME (V or A) button to tune in to the de-
si red station.
Manual tuning:
Press the TUNINGfTlME button as many times as required to
tune in to the desired station.
Auto tuning:
When the TUNINGfTlME button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
~----------I:D
,- "1/
'-I '-I '-I
STQ)I
r- , ,
=, ,=,
.CJ
MHz
FM stereo receiving indicator
• If the FM reception is weak, press the TUNER (BAND) button to
extinguish the IIST II indicator. The reception changes to monau-
ral, and the sound becomes clearer.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
• "m" will appear when an FM broadcast is in stereo.
.
.
.
.
.
-VPRESETr-.
I+0Il ~
...
.
..
)
MEMORY
ISET
TUNER
[BAND]
Ii' ,
®
TUNING/TIME
'V' /'...
. .
POWER
ON/
STAND-BY
. . .
1
Press the ON/STAND-BY button to turn the power on.
• Tuning
19