Sharp XL-HP700 Operation Manual page 11

XL-HP700
, /,-, , '-I
,--, C': ,_ '- '-'
o'--I
------.Jlo
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
• To turn the power on
Press the ON/STAND-BY button to turn the power on.
Notes:
• The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
• Unplug the AC power cord from the AC outlet if the unit will not
be in use for a prolonged period of time.
• Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASSI
DEMO button again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
Incorrect
Incorrect
Speaker grilles are removable:
Make sure nothing comes into contact
with the speaker diaphragms when you
remove the speaker grilles.
• Connecting the AC power cord
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.
Caution:
• Connect the speaker wires to the speakers first, then to the
unit.
• Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
• Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
• Do not let the bare speaker wi res touch each other.
• Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
• Do not stand or sit on the speakers. You may be injured.
• Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
11