Sharp XL-HP700 Operation Manual page 16

XL-HP700
Listening to a CD (CDs) (continued)
Press one of the DISC SELECT
G) - @
(©
1 -
©
3) buttons to se-
lect the desired disc.
To stop playback:
Press the. (CD .) button.
,-/.,-/
,
'-'
.'-'
,
Selected disc number
~~~/
@1 @2 @3
LJVLV
0 0 0
• To specify a disc to play
You can playa disc by specifying the disc number.
Only the chosen disc will be played and stopped automatically.
Note:
If the button of the disc tray with no disc is pressed, playback will not
start and the disc number indicator will go out.
Caution:
• Do not place two CDs in one disc tray.
• Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
• Do not push the disc tray while it is moving.
• If the power fails while the tray is open, wait until the power is
restored.
• If the disc tray is stopped forcibly, IIER-CD20 11 will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
• If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
• If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
For audible fast reverse:
Press and hold down the .... button during playback.
For audible fast forward:
Press and hold down the ~ button during playback.
• To locate the beginning of a track
• To locate the desired portion
To move to the beginning of the next track:
Press the
~
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
~
button for less than 0.5 seconds during playback.
Notes:
• You can locate the beginning of a track on a single disc only.
• You can skip to any track by pressing the
~
or
~
button
repeatedly until the desired track number appears.
Notes:
• Normal playback will resume when the .... or
~
button is re-
leased.
• You can locate the desired portion on a single disc only.
• When the end of the last track is reached during fast forward, II
XX
END II will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
(xx: Last track number)
16