Advanced Cd Playback - Sharp CP-UH240H Operation Manual

Advanced CD playback

XL-UH240H
ENGLISH
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press
the MEMORY button on the
remote control to enter the
programming save mode.
2
Press one of the 1 - 5 buttons
to select the desired disc.
3
Press the direct search buttons
on the remote control to select
the desired track.
You can also select a track by pressing the
4
Press the MEMORY button to
save the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6
Press the (CD ) button.
The total number in memory will ap-
pear.
7
Press the / button to start playback.
E-17
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control whilst the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY" in-
dicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
Selected disc number tracks will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
Selected track number
Notes:
or button.
When a disc with programmed tracks is ejected, the programme
is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the programme operation, random play is not possible.