Drive Wheels - Invacare Rea Comfort Assembly Instructions Manual

1.
A
2.
REA COMFORT

Drive wheels

B
B
1.
Attach the drive wheel by depressing spring-
loaded button (A), at the centre of the hub. Keep
it depressed, while simultaneously feeding axle
(B) into the hub.
It is very important that you check that the
locking pin has actually locked the wheel
into position when the centre button has
!
been released. Take hold of the wheels and
try to detach them. This should NOT be
possible.
2.
The drive wheel plate can be moved by using a
fixed spanner to slacken and remove the nuts.
5