Detaching The Dome Cover - Panasonic WV-SF549 Installation Manual

Detaching the dome cover

Detach the dome cover from the camera by loosening the dome cover fixing screws.
SF549 SF548
The following procedure is required when using WV-SF549 or WV-SF548. Refer to page 18 when
using WV-SF539 or WV-SF538.
IMPORTANT:
• Remove the cover film from the dome section of the dome cover after the installation is com-
plete. Do not touch the dome section by hand directly after removing the cover film.
z
Loosen the dome cover fixing screws using
the bit for tamperproof screw (accessory).
Note:
• The dome cover and the camera are joint-
ed with an assist wire. Do not remove the
assist wire.
Dome cover fixing screw
17