Installation - Panasonic WV-SF549 Installation Manual

Installation

Camera mounting
Installation shall be conducted after turning off each device.
z
Detach the dome cover. (☞ Page 17)
x
Connect the cables to the camera. (☞ Pages 23 - 28)
As necessary, use a cable tie (accessory) to assemble the cables.
c
Mount the camera. (The illustration represents the case in which a two-gang junction box is
installed.)
Fix the camera with 4 screws (M4, locally procured).
46 mm {1-13/16 inches}
Direction marker for installation
(gTOP)
IMPORTANT:
• When tightening the screws, be careful to ensure that the cables does not tangle the cables.
Note:
• For ceiling mounting
Select which direction to face the front (the side where the Panasonic logo and "FRONTh" are)
of the camera. Refer to the "Adjustment" section (☞ pages 30 - 33) for further information
about adjustment.
• For wall mounting
The camera shall be mounted with the "gTOP" marker facing upward.
Screws (locally procured)
83.5 mm {3-9/32 inches}
Two-gang junction box
Direction marker for installation
(FRONTh)
29