Switching Issuing Mode; Installing The Roll Paper - Epson TM-P60 Technical Reference Manual

Switching Issuing Mode

The issuing mode can be switched between the label continuous issuing mode and the label
peeler issuing mode by folding the peeler holder under the peeler cover.

Installing the Roll Paper

CAUTION:
Be sure to use roll paper that meets the specifications.
Note:
Do not use paper rolls that have the paper glued to the core.
1. Press the open button to open the roll paper cover and the peeler holder.
2. When using the label continuous issuing mode:
Fold the peeler holder under the peeler cover. This covers the label peeler detector.
When using the label peeler issuing mode:
Peel off the first label, and press the peeler change over lever to lift the peeler holder.
2-6 Setup Rev. B