Switching Issuing Mode - Epson TM-P60II Technical Reference Manual

Switching Issuing Mode

With the roll paper cover and peeler cover open, you can switch the issuing mode between the label continuous
issuing mode and the label peeler issuing mode by folding the peeler holder under the peeler cover or using the
peeler switch lever.
Label peeler issuing mode: the label is peeled off from the liner when the paper is fed.
The printer operates in the label peeler issuing mode immediately after closing the peeler cover
or turning on the power. When the specified amount of paper is fed, if a label is not detected by
the label peeler sensor, the printer operates in the label continuous issuing mode. When the
cover is opened or the power is turned off, the mode setting is returned to the default (the label
peeler issuing mode).
Chapter 1 Product Overview
19
1