Advanced Settings - Epson TM-P60 Technical Reference Manual

❏ Advanced Settings button
The Wireless Advanced Settings dialog is displayed; set the following detailed items.
❏ Advanced Settings
Item
Transmission Rate
Authentication
Method
❏ Power Management Setting
Note:
When using the TM-P60 with Peeler in the Ad-Hoc mode, this function is disabled.
It depends on Access point whether using this function is possible or impossible.
Item
Set power
management
Rev.
B
Explanation
Select one of the following: Automatic/1Mbps/2Mabps/5.5Mbps/
11Mbps.
Set either Shared key or Open System.
Explanation
Select Disable/Enable of Power management.
TM-P60 with Peeler Technical Reference Guide
Wireless LAN Setup Detailed Information A-25