Epson TM-P60 Technical Reference Manual page 90
With peeler
Hide thumbs
Also See for TM-P60:
- Technical reference manual (142 pages) ,
- User manual (104 pages) ,
- Installation manual (26 pages)
Table of Contents
Advertisement
Search Options - COM
Specify the Searching COM port to match a TM-P60 with Peeler connected by an RS-232C cable.
Item
Port
Baud Rate (bps)
(See note below.)
Parity
Flow Control
Note:
The TM-P60 with Peeler supports only the baud rates 9600, 19200, and 384000. When you specify
another baud rate with the utility, the utility can't communicate with the TM-P60 with Peeler.
A-18 Wireless LAN Setup Detailed Information
Explanation
Set the COM port number.The COM port numbers that can be used are
1 through 256.
Set the baudrate.The baud rate that can be set is one of the following:
9600/14400/19200/38400/56000/57600/115200.
Set the parity. Set either No Parity, ODD or EVEN.
Set the flow control. Set either NONE, RTS/CTS, or DTR/DSR.
Rev. B
Advertisement
Table of Contents
