Epson TM-P60 Technical Reference Manual page 145

Example: Liner width: 59.5 mm/Label width: 56 mm
1.75±0.75
17dot
4.75
Note:
The printable area may be out of alignment by 2.8 mm {0.11"} maximum (left or right), due to the paper
position or tolerance of parts. To make the margin for both sides safely, it is recommended to set a margin
of 2.8 mm {0.11"} or more. (Numeric values used here are average values for designing.)
❏
Paper Width and Printable Area (Recommended)
Liner width (mm)
Label width (mm)
Printable Area (mm)
Left margin (mm)
Right margin (mm)
Positioning dot number
(It is assumed that the label is placed on the center of the liner exactly. Numeric values used
here are average values for designing.)
Rev.
B
59.5 ± 0.5
56 ± 0.5
416ot
52 50
Printable Area
59.5 57.5
56 54
50 48.5
3 3
3 3
17~416 17~404
TM-P60 with Peeler Technical Reference Guide
1.75±0.75
1.5
Programmable by
control command
Printable Area
4.75
1.5
[Units: mm]
54.5 48 41.5
51 44.5 38
45 38 32
3 3 3
3 3.5 3
17~376 17~320 17~272
Consumable Specifications F-5
35.5 29
32 25.5
26 20
3 3
3 2.5
17~272 17~176