Epson TM-P60 Technical Reference Manual page 142

❏ Take-up roll paper width:
• 58 mm paper width: 58 mm + 0/-1.0 mm
• 60 mm paper width: 60 mm +0/-1.0 mm
❏ Roll paper diameter:
• Maximum 51 mm
❏ Roll paper spool outside diameter:
• 31.4 mm or more
Note:
Paper must not be pasted to the roll paper spool.
❏ Specified roll paper number:
Paper type
Die-cut label
Note:
A specified paper must be used to keep the print quality.
❏ Specified original paper type number: The following original paper can be used for receipts:
TF50KS-E (paper thickness: 65 µm): NIPPON Paper Industries Co.,Ltd.
U.S.A.:
P350 (paper thickness: 62 µm): Kanzaki Specialty Paper (USA)
P310 (paper thickness: 58 µm): Kanzaki Specialty Paper (USA)
P300 (paper thickness: 56 µm): Kanzaki Specialty Paper (USA)
❏ Arrangement of the roll paper end:
• A red line that indicates the paper end (its length is decided by users) is recommended
to be preprinted on the end of the roll paper.
F-2 Consumable Specifications
Label length Paper width (width of the liner)
58 mm
25mm ETLA058050025
51mm
55 mm 29.5 mm
ETLA029050025
ETLA055050051
Rev.
B