Epson TM-P60 Technical Reference Manual page 87

A.2.3.1 Menu Bar
This table shows each item and its function.
Menu
Device
View
Tool
Help
When you use this function, Windows printing cannot be done while opening the
(*)
TMNetWinConfig. You should use this option only if you connect TM-P60 with Peeler with an
RS-232C cable to your PC.
Time-out
Use Time-out setting to set the time-out for data transmission and reception. This can be set
from 2 to 120 seconds. If the time-out exceeds the value set, a communication error occurs.
Rev.
B
Sub Menus
Configuration
Launch Browser
Quit
Refresh
Time-out
Search Method (*)
Search Options IP
IPX
COM
Firmware Update
Help Topics
About TMNetWinConfig
TM-P60 with Peeler Technical Reference Guide
Explanation
Start the setting of the TM-P60 selected
Start up the TMNetWebConfig
Close the TMNetWinConfig
Find the printers and update the list to show the latest
information.
Set the time-out for data transmission and reception
to 2 to 120 seconds.
Set the search method.
Set the UDP/IP Search Options setting.
Set the IPX Search Options setting.
Set the COM Search Options setting.
Update the firmware. (usually you don't need to use
this function)
TMNetWinConfig help
Version information and copyright information.
Wireless LAN Setup Detailed Information A-15