Yamaha VX500SXBC Service Manual page 69

1 Wire lead (electrical starter
model)
2 Carburetor switch coupler
3 Fasten the throttle cable and
oil pump cable with a plastic
clamp.
4 Air temperature sensor
coupler (ECC model)
5 Coolant hose
6 Starter relay lead
7 Starter relay sub lead
(electrical starter model)
8 Fasten the wire harness,
battery negative lead and
coolant hose with a plastic
clamp. (electrical starter
model)
9 Route the battery lead along
the behind coolant hose.
10 Battery negative lead
11 To battery negative terminal
12 To starter relay
13 To reverse gear
14 Gear position switch lead
(reverse model)
15 Route the main switch
harness along the under of
the oil and fuel breather hose.
16 Brake hose
17 Oil tank
18 Route the parking brake cable
along the under of the oil
breather hose.
19 Main switch assembly
20 Starter cable assembly
21 Oil pump cable
22 Throttle cable
23 Air bent hose (ECC model)
24 Variable resister
25 Oil level gauge
26 Variable resister coupler
27 Parking brake
28 Fuel switch (ECC model)
29 Diagnosis check coupler
(ECC model)
30 Atmospheric pressure sensor
coupler (ECC model)
31 Ignition coil coupler
CABLE ROUTING
–65–
SPEC