Yamaha VX500SXBC Service Manual page 43

700
* Intake silencer
D First, remove the throttle cable from the cable guide on the steering column.
D Adjust the throttle cable free play while the cable is in the cable guide.
D After adjusting the throttle cable free play, properly install the upper and lower intake silencer
plates and seal.
Order Job name/Part name
Carburetors removal
1 Spark plug caps
2 Clamp screws
3 Carburetor switch (T.O.R.S.) leads
4 Clamp
5 Coolant hoses
6 Throttle cable
7 Starter cable
8 Fuel hoses
9 Carburetors
CARBURETORS
Q'ty
Remove the parts in the order below.
3
6 Loosen
2
1
3
1
1
3
1
For installation, reverse the removal
procedure.
–39–
CARB
Remarks