Yamaha VX500SXBC Service Manual page 65

CABLE ROUTING
<For 500>
1 Oil pump cable
2 Throttle cable
3 Fasten the wire harness.
Do not fasten the throttle
cable and oil pump cable.
4 Fasten the throttle cable and
oil pump cable
with a plastic clamp. Route
the cable along the side of the
handle holder.
5 Thumb warmer coupler
6 Engine stop switch coupler
7 Grip warmer lead
8 Brake light switch coupler
9 Head light switch coupler
10 Fasten oil breather hose and
wire harness with a plastic
clamp.
11 Parking brake cable
12 Oil breather hose
13 Fasten the oil breather hose
with a plastic clamp.
14 Fasten the wire harness and
oil breather hose behind the
steering colum with a plastic
band.
Do not fasten the parking
brake cable and brake hose.
15 Grip warmer control knob
16 Fasten the wire harness and
fuel breather hose with a
plastic clamp.
17 Ground lead
18 Fuel sender coupler
19 Oil level switch coupler
20 Fuel switch coupler
21 Bolt
22 Fuel breather hose
23 Spring compression
24 Fuel pipe
25 Clip
26 Spring compression
27 Fuel hose
28 To the carburetor
29 Pulser hose
30 Oil hose
31 To oil pump
32 Wire harness
33 Oil hose
34 Coolant hose
CABLE ROUTING
–61–
SPEC