DRIVE CHAIN HOUSING
INSTALLATION
During installation, pay attention to the fol-
lowing point:
A Make sure that the bearing seals face towards
the drive chain, as shown.
B Properly install the rubber seal onto the drive
chain housing, making sure that these are no
gaps.
C Be sure to install the spacers in their original
positions of the brake disc and jackshaft will
stick.
D 0.1 X 0.5 mm (0.004 X 0.020 in)
: ESSO beacon 325 grease or Aero-
shell grease #7A
–19–
POWR
TR