Projective Resolving Power Check - Sony SAL100M28 Service Manual

4-3.

PROJECTIVE RESOLVING POWER CHECK

Equipment
• Lens Test Projector and Variable Transformer (Output voltage: AC 100 V)
Note:
Connect the variable transformer (Output voltage: AC 100 V) to the lens test projector.
• A-mount Attachment
• Screen (Art paper)
• Tape Measure
• Plane Mirror (For SLRs)
1. Preparations
Note:
Check the projective resolving power of the checking lens at the following focal-length and distance.
Focal-length f (mm)
100
1) Perform the following steps (1) to (3), and incorporate the internal lenses of the lens test projector according to the checking focal-
length.
(1) Open the lid of the lens test projector.
(2) Pull up and turn the fixed levers on the right and left sides of the lens test projector.
(3) Remove or insert the lens.
Note:
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
distance (m)
4.2
Table 4-3-1
Be sure to have the right position and direction of the lens.
Fixed lever
Lid
Lens test projector
Incorporate of the lenses
according to the checking focal-length (f).
Lens
Chart
Fixed lever
Chart
Fig.4-3-1
4-7
Heat-absorbing filter
Chart
Filament
f=18 to 35 mm f=100 to 200 mm
Chart
Filament
f=35 to 100 mm f=200 to 300 mm
Filament
Filament