Sony SAL100M28 Service Manual page 37

HELP35
Adhesive bond (B-10):
Universal Wrench:
Chip-A For Universal Wrench: J-6082-609-1
Chip-B For Universal Wrench: J-6082-609-2
1. Fasten the focus cam ring B holder until it stops, then loosen back by 5 mm.
2. Apply the adhesive bond (B-10) to the instruction part as shown in the figure, it tightens with a universal wrench.
Apply the adhesive bond (B-10)
(2 points for approx. 10 mm long.)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
J-6082-612-A
J-6082-609-A
Focus Cam Ring B Holder
Focus Cam Ring B Holder
10 mm
HELP