Sony SAL100M28 Service Manual page 34

HELP28
Adhesive bond (B-40): J-6082-614-A
1. Attach the fixed tube block to the midway move frame block.
2. Apply the adhesive bond (B-40) to the three linear guide pins and tighten them.
Apply the
adhesive
bond (B-40)
HELP29
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
Attach the gear cover, and apply the adhesive bond (B-10, B-40) to the two screws as shown in the figure.
Gear Cover
Apply the
adhesive
bond (B-40)
HELP30
Attach the flexible cover sheet as shown in the figure.
Reference line
Flexible Cover Sheet
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Apply the
adhesivebond (B-40)
Main Flexible Block
Apply the adhesive bond (B-10)
HELP