Sony SAL100M28 Service Manual page 42

Ver 1.1 2007.02
HELP42
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
1. Attach the preset lever, and apply the adhesive bond (B-10) to the two screws as shown in the figure.
2. Attach the aperture interval cam, and apply the adhesive bond (B-40) to the two screws and tighten as shown in the figure.
3. Attach the main spring hook, and apply the adhesive bond (B-40) to the screws and tighten as shown in the figure.
Main Spring
Apply the adhesive
bond (B-40)
Main Spring Hook
4. Attach the preset lever, and apply the adhesive bond (B-10) to the instruction part as shown in the figure.
Main Spring Hook
Apply the adhesive
bond (B-10)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Apply the adhesive
bond (B-10)
Preset Lever
Apply the adhesive
bond (B-40)
Preset Lever
Main Spring
Aperture Interval Cam
HELP