Sony SAL100M28 Service Manual page 20

HELP08
Adhesive bond (B-10): J-6082-612-A
Removing the Decoration Ring
1. Turn the focus operation ring to the infinity slowly until the gap between the fixed barrel and decoration ring appears within the hole
of the middle moving frame (hole for attaching the front lens barrel).
2. Pour alcohol into the gaps (3 areas) using the tweezers, etc, then leave it for a few minutes.
Note:
Leave it with the lens mount upward to prevent the alcohol from spreading inside.
3. Grip and remove the decoration ring using the nonskid rubber, etc.
Pour alcohol
Middle Moving Frame
Decoration Ring
Hole (for attaching the front lens barrel)
Attaching the Decoration Ring
Apply the adhesive bond (B-10) to the instruction part of the decoration ring.
30 mm
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Decoration Ring
Gap
Middle Moving Frame
Apply the
adhesive
bond (B-10)
HELP