Sony SAL100M28 Service Manual page 35

Ver 1.1 2007.02
HELP31
Adhesive bind (B-60): J-6082-616-A
1. Attach the insulation tape, then attach the flexible substrate setting tape B to the main flexible block.
2. Match the hole of main flexible block to the hole of outer barrel.
3. Attach the main flexible block in the direction of the arrow.
4. Apply the adhesive bind (B-60) to the instruction part as shown in the figure
Note:
Do not adhere the bond (B-60) on the terminals of IC and soldering portion on each device.
In case that the bond is adhere to them, wipe out the adherent bond.
3Reference line
HELP32
Attach the anti refrection tape sheet as shown in the figure.
Reference line
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Insulation Tape (4x10 mm)
Flexible Substrate Setting Tape B
1Match the holes
Anti Refrection Tape Sheet
Main Flexible Block
2Reference line
Apply the adhesive bond (B-60)
(4 points)
HELP