HELP04
1.
Attach the flexible substrate setting tape to the joint tube block.
2.
Attach the main flexible block and flexible pc board (A) as shown in the figure.
Main Flexible Block
Flexible PC Board (A)
3.
Solder the flexible PC board (A) to the main flexible block as shown in the figure.
Flexible PC Board (A)
4.
Attach the flexible substrate setting tape, and fold the main flexible block to fix as shown in the figure.
Fold to attach
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
Joint Tube Block
Flexible Substrate Setting Tape
(5x14 mm)
Solder
Main Flexible Block
Flexible Substrate Setting Tape
HELP