Chevrolet Light Duty Truck 1973 Service Manual page 397

sufficient clearance. Check for interference
between rear of engine and cowl panel.
4. Replace mount to engine and lower engine into
place.
5. Install retaining bolt and torque all bolts to
specifications.
Rear Mount Replacement
1. Support engine weight to relieve rear mounts.
2. Remove crossmember-to-mount bolts.
3. On P Series with manual transmission and
propeller shaft parking brake, remove mount
attaching bolts from frame outrigger and clutch
housing and remove rear mounting cushions.
4. Remove mount-to-tfansmission bolts, then remove
mount.
5. On P Series with manual transmission and
propeller shaft parking brake, install new mounting
cushions and bolts.
6. Install new mount on transmission.
7. While lowering transmission, align and start
crossmember-to-mount bolts.
8. Torque bolts to specifications then bend lock tabs to
bolt head as applicable.
E N G I N E 6-61
LIGHT DUTY TRUCK SERVICE MANUAL