Chevrolet Light Duty Truck 1973 Service Manual page 190

3 -1 6 FRONT SU SPEN SION
WHEEL HUBS, BEARINGS (Fig. 23)
Removal C, G and P Series
1. Raise vehicle on hoist and remove wheel and tire
assembly. Remove dust cap from end of hub and
withdraw cotter pin.
2. Remove the brake caliper and hang by wire to the
suspension.
Do not allow the caliper assembly
CAUTION:
to hang by the brake flex line.
PIVOT SHAFT OUTBOARD OF FRAME
CASTER
Fig. 21— Caster - Camber Adjustment
Fig. 22—Toe-in Adjustment
C O M PO N EN T PARTS REPLACEMENT
A
CAMBER
FORWARD
3. Remove hub and disc assembly.
4. Remove outer bearing from hub. The inner bearing
will remain in the hub and may be removed by
prying out the inner grease seal.
5. Wash all parts in cleaning solvent.
Inspection
1. Check all bearings for cracked bearing cages, worn
or pitted rollers.
2. Check bearing races for cracks or scoring, check
LIGHT DUTY TRUCK SERVICE MANUAL