Chevrolet Light Duty Truck 1973 Service Manual page 160

1B-40 BODY
1. Roller
2. Lockwashers
3. Nut
4. Cam
5. Washer
6. Bushing
7. Bushing
DOOR STRIKERS
See CAUTION on page 1 of t h i s
CAUTION:
section regarding Door Striker fasteners.
Rear Lock Striker
Removal
1. Open door.
2. Remove door striker using tool J-23457. See figure
13G.
installation
1. Install door striker using tool J-23457. Torque to
specifications.
2. Adjust striker as outlined
Adjustments".
8. Bolt 15. Screw
9. Plate 16.
10. Upper lines 17.
11. Spacer 18.
12. Spring (Upper Lever) 19.
13. Spring (Lower Level) 20.
14. Lower Lever
Fig. 24G—Upper Left Hinge Components
Front Latch Striker
1. Remove striker.
2. Install new striker. Adjust as outlined under "Door
SLIDING DOOR ADJUSTMENTS
The side door can be adjusted for alignment and/or
clearance in the body opening and for proper latching.
When properly positioned in the body opening, the door
should have equal clearances around its perimeter.
Door adjustments consist of the following: Up and down,
under "D oor
fore and aft, in and out, front and rear strikers, rear
door wedge, upper left hinge striker, and lower catch.
21. Cam
22
Guide Block
Bushing
.
Hinge (Body Half)
23. Hinge (Door Half)
Nut
24. Spring
Bushing
25. Spring retainer
Bushing 26. Hinge liner
Adjustments" Torque to specifications.
LIGHT DUTY TRUCK SERVICE MANUAL