Fig. 8 —Glove Box
INSTRUMENT PANEL COMPARTMENT AND
LOCK
Replacement
Removal of the entire assembly including door may be
accomplished by removing four screws which attach
hinge just below box. See figure 8. The outer door panel
may be removed, leaving the compartment intact, by
removal of four screws. Access to the door stop bumper
is gained by reaching into compartment opening with
door partially open.
Fig. 9—Rear View Mirror—Base
Fig. 10—Rear View Mirror—Below Eyeline
Adjustment
Engagement of lock in striker may be adjusted by
loosening striker retaining screws and moving the striker
to desired position.
OUTSIDE REAR VIEW MIRRORS
Rear view mirror installations are shown in figures 9, 10
and 11. Occasional tightening of mounting and assembly
bolts and screws will sharply decrease occurrence of
failure due to door slamming or road shock.
Fig, 11—Rear View Mirror—West Coast
BODY
IB - 5